Spicer Drive Axles Illustrated Parts List Dana Spicer Service Carrier List - Manual (Page 34)

33
New Service Carriers Tandem Drive Axles
Tandem Drive Axle - Single Reduction Carriers
DS341 - Standard Carrier
16.50" Spiral Bevel Gearing (3.90-7.17 Ratio)
Side Gear # 110525
These new carrier units will directly replace model DS341 with no
modifications.
Side Gear New
Ratio Spline Carrier Notes
3.55 39 Inv 674898
3.70 39 Inv 675615
4.11 39 Inv 675276
4.33 39 Inv 674931
4.56 39 Inv 675245
RS341 - Standard Carrier
16.50" Spiral Bevel Gearing (3.90-7.17 Ratio)
Side Gear # 110525
These new carrier units will directly replace models RS341 and
17130 with no modifications.
Side Gear New
Ratio Spline Carrier Notes
4.11 39 Inv 675277
4.56 39 Inv 674900
4.88 39 Inv 675472
5.29 39 Inv 675537
5.57 39 Inv 675355
DS402(P) - Standard Carrier
16.00" Spiral Bevel Gearing (3.36-3.70 Ratio)
16.50" Spiral Bevel Gearing (3.90-7.17 Ratio)
Side Gear # 110527
These new carrier units will directly replace models DS381(P),
DS402(P) and DS451(P) built with 41 Involute spline side gears.
(See Note 1)
Side Gear Non-Pump Pump
Ratio Spline Carrier Carrier
3.08 41 Inv 674686 nla
3.36 41 Inv 674456 674462
3.55 41 Inv 674457 674463
3.70 41 Inv 674458 674464
3.90 41 Inv 674459 674465
4.11 41 Inv 674460 674466
4.33 41 Inv 674461 674467
4.56 41 Inv 674633 674635
4.88 41 Inv 674688 674703
5.29 41 Inv nla 674704
5.57 41 Inv 674690 674824
RS402 - Standard Carrier
16.00" Spiral Bevel Gearing (3.36-3.70 Ratio)
16.50" Spiral Bevel Gearing (3.90-7.17 Ratio)
Side Gear # 110527
See Note 1. These new carrier units and will directly replace
models RS381, RS402 and RS451 built with 41 Involute spline
side gears.
Side Gear New
Ratio Spline Carrier Notes
3.36 41 Inv 674468
3.55 41 Inv 674469
3.70 41 Inv 674470
3.90 41 Inv 674471
4.11 41 Inv 674472
4.33 41 Inv 674473
4.56 41 Inv 674634
4.88 41 Inv 674693
5.29 41 Inv 674694
5.57 41 Inv 674695
Note 1: In Nov. 1995, the models DS/RS451(P) were produced in
both 33 and 41 Involute side gear configurations. Before ordering
a service carrier verify correct spline count.