Spicer Driveline Components Catalog: Tubing and Tube & Tube Yoke Assemblies - Manual (Page 6)

Important: See Safety Information in General Information Section (J300P-GI)
6
ALUMINUM TUBING
Straight Tube
J300P-6
*
NOTE: The part numbering system includes tube length in the last set of numbers, with the last two
digits as the number of 1/32 of an inch. Part numberings ending with “M” are measured in millimeters.
Example: -1216 is a 12 16 /
32
” long tube, -1607M is a 1607mm long tube
* Tubing size 3.9800 x .0750 uses the same aluminum tube yoke as 4.000 x .083 wall tubing.
Tubing size 5.0200 x .0750 uses the same aluminum tube yoke as 5.000 x .065 wall tubing.
Tubing size 5.0600 x .0920 uses the same aluminum tube yoke as 5.000 x .065 wall tubing.
B
Wall
Thickness
S=Seamless
W=Welded
D=D.O.M.-Drawn
Over Mandrel
Inside Diameter
(Nominal)
Part
Number
3.5000 Outside Diameter
.1200 S 3.2660 28-38-12-1216
3.9800 Outside Diameter
.0750 S 3.8360 212247X-1580M
1580mm tube length
.0750 S 3.8360 212247X-1607M
1607mm tube length
.0750 S 3.8360 212247X-1632M
1632mm tube length
.0750 S 3.8360 212247X-1643M
1643mm tube length
5.0200 Outside Diameter
.0750 S 4.8730 212009X-1742M
1742mm tube length
.0750 S 4.8730 212009X-1937M
1937mm tube length
.0750 S 4.8730 212009X-5903
Has foam deadner
.0750 S 4.8730 212009X-6129
Has foam deadener