Spicer Steer Axles Application Guidelines - Manual (Page 15)

AXAG400 – February 2007 front < 9 >
Alignment/Adjustment
2- Applications, Engineering Data
The following chart shows all available Spicer Steer Axles with a brief Engineering
description. Once you click on a model, you will be taken to an Engineering Data
Information Sheet that will have details on the following: Beam Drop, Turn Angle,
Kingpin, Wheel bearing adjustment, Weight, Ground clearance, Spring mounting
centers, camber and kingpin angles, nominal ratings, maximum track, steering
knuckles, axle center, kingpin intersection, overall width, bearing shoulder to bearing
shoulder, wheel bearings, model identification, steering knuckle options, available steer
arms, available tie rod arms, available spring pad drilling, axle rating specifications –
GAWR versus track @ max tire SLR and nominal SMC.
Applications outside the specified vocations and duty cycles shown in section 4, as well
as the ratings (ie: GAWR, track and wheelbase) shown below, must be reviewed on an
individual basis by the Spicer Heavy Vehicle Technology and Systems Operations
Application Engineering Department (an example of an Engineering data sheet can be
found on pg-[16] ).