Overhaul and assemble wheel differential – Spicer Single Drive Axles Service Manual: S135L, S135N, S135S, S150L, S150N, S150S User Manual
Page 24
20
Wheel Differential
Overhaul and Assemble Wheel Differential
CAUTION: To prevent bearing damage, use suitable
sleeve that only contacts the inner race of the cone. A
used bearing race would be a suitable tool. This tool
should have a slit cut if the ID is the same as the flange
OD.
1.
Press new flange half bearing cones on differential
case halves.
2.
Press new plain half bearing cones on differential
case halves.
3.
Place thrust washer and side gear in flanged differ-
ential case.
4.
Lubricate all differential parts.
5.
Assemble side pinion and thrust washers on spider.
Place this assembly in flanged differential case.
Rotate gears and check for proper mesh.
6.
Place side gear and thrust washer on side pinions.
7.
Align punch marks and install plain case half. Install
cap screws and tighten to proper specifications as
outlined in the back of this publication. Check differ-
ential for free rotation by turning side gear hub.
8.
Install ring gear. Secure with bolts and nuts.
1
1 - Punch marks