Spicer Single Drive Axles Service Manual: S135L, S135N, S135S, S150L, S150N, S150S - Manual (Page 5)

1
General Information
General Information
Introduction
Dana Corporation presents this publication to aid in mainte-
nance and overhaul of Dana single reduction drive axles.
Instructions contained cover the models listed below. Their
design is common, with differences in load capacity. Capacity
variations are achieved by combining basic differential carrier
assemblies with different axle housings, axle shafts, and
wheel equipment.
Model Listing
The following models are included in this publication:
Dana Single Reduction Axles
With Standard Wheel Differential
S135L S135N S135S
S150L S150N S150S
S 135 S
Spicer Gearing Type
S = Single Reduction
L = True Trac Differential
N = No Spin
Nominal Load
Carrying Capacity
135 = 13,500 lbs.
150 = 15,500 lbs.