RUSSELL HOBBS 15129-56 - Manual (Page 5)

5
58 Leave it to cool down completely.
59 When it’s cold, wipe off any moisture, and wind the cable round the heel.
60 Store the iron on its heel, to avoid corrosion and damage to the soleplate.
C SELF CLEAN
61 To prevent scale building up, use the self clean function at least monthly in normal water
areas, more often in hard water areas.
, Products returned under guarantee with faults due to scale will be subject to a repair charge.
62 You’ll need a basin or a large bowl to catch the water coming out of the soleplate.
63 Fill the reservoir to the max mark.
64 Set the temperature control to max. Set the steam control to S.
65 Sit the iron on its heel.
66 Put the plug into the power socket.
67 Wait till the light goes off.
68 Hold the iron over the basin or bowl, with the soleplate down.
69 Press the C button, and keep it pressed in.
70 Gently move the iron to and fro.
caution
keep clear of the escaping water and steam
71 Water and steam will wash scale and dust through the soleplate.
72 Carry on till the reservoir is empty.
73 Set the steam control to S.
74 Release the C button.
75 Unplug the iron, and sit it on its heel to cool.
76 When it’s cold, wipe off any moisture, and wind the cable round the heel.
77 Store the iron on its heel, to avoid corrosion and damage to the soleplate.
e ANTI-SCALE
78 The anti-scale agent incorporated in the iron helps prevent the build-up of scale.
79 Don’t use a descaling solution, or you’ll destroy the anti-scale agent.
C CLEANING
80 Unplug the iron, and sit it on its heel to cool.
81 Clean the outside surfaces of the appliance with a damp cloth.
82 Remove spots from the soleplate with a little vinegar.
83 Store the iron on its heel, to avoid corrosion and damage to the soleplate.
H ENVIRONMENTAL PROTECTION
To avoid environmental and health problems due to hazardous substances in electrical
and electronic goods, appliances marked with this symbol mustn’t be disposed of with
unsorted municipal waste, but recovered, reused, or recycled.