Hyundai H-CMMD4044 - Manual (Page 21)

21
General operations
Power on/off
Press POWER button on the front panel or STANDBY button on the RC to turn the unit on. Press and hold
POWER button for 2 seconds or press STANDBY button on the RC to turn the unit power off.
Note: After the unit is off, the volume level and radio current settings will be memorized, and when you turn the
unit on it will resume the stored status that you set.
Volume control
Rotate VOL knob on the panel or press VOL+/VOL- buttons on the RC to adjust the volume level.
Mute function
When the unit power is on press POWER button on the panel or MUTE button on the RC to mute volume control.
Press it again or press VOL +/- button to resume the volume.
Setting the audio and picture parameters
1. Press SEL button on the RC to select the desired audio or picture setting:
BASS, TREBLE, BALANCE L-R,
FADER, BRIGHT, CONTRAST, COLOUR, SHARP (last 4 parameters are available only in DVD mode).
2. Press cursor LEFT/RIGHT buttons, or rotate VOL knob or press VOL+/VOL- buttons on the RC to adjust
the setting.
Note: If turning off the ACC power all the settings will become as they were set on the plant as current.
If you don’t adjust the setting within 3 seconds after selecting the setting, the unit will automatically return to the
current mode being displayed.