Hyundai H-CMMD4044 - Manual (Page 36)

36
AUTO/MANUAL – press for auto/manual search of channels.
Auto tuning
1. Press LEFT/RIGHT cursor buttons to start auto search of available TV station in backward/forward direction.
When the first available station is found searching will be stopped and the station found will be played. Press
the button again to continue searching.
2. During search, press any of these buttons to stop search.
Manual tuning
Press and hold for 2 seconds LEFT/RIGHT cursor buttons repeatedly to search the TV stations step by step.
Press ENTER button to save a channel.
Auto preset memory
1. Press and hold for 2 seconds BAND/P.SCAN button on the panel or RPT/P.SCAN button on the RC to start
auto tuning; the search range is the current TV frequency range. The stations found will be stored into the
memory automatically.
2. Press GOTO/STOP button on the RC to stop auto searching.
Scan function
1. You can scan each stored channel for several seconds in sequence. Press BAND/P.SCAN button on the panel
or RPT/P.SCAN button on the RC to start scanning.
2. Press GOTO/STOP button on the RC to stop auto scanning.
Select the TV station
1. Press number buttons on the RC to recall the desired TV station.
2. PREV/NEXT buttons on the RC or UP/DOWN cursor buttons on panel to change the channels step by step
in forward/backward direction.