Velleman VMB1TC - Manual (Page 55)

VMB1TC Temperature controller manual – rev 5.0 55
Default duration of temporary mode (default sleep time)
The thermostat program can be temporary ignored by using the sleep timer. The default duration of this sleep time can be set.
1. Press the ‘Location’ button repeatedly until the
desired sensor or zone for which the default sleep
time will be set is displayed.
2. Press and hold the ‘Menu’ button for ±4 seconds to
open the extended menu.
3. Scroll through the extended menu using the ↑ or ↓
button until the ‘Sensor settings’ item appears.
4. Select the sensor settings menu with the → button.
5. Scroll through the sensor settings menu using the ↑
or ↓ button until the ‘Sleep timer’ item appears.
6. Select the sleep timer menu with the → button.
7. Change the ‘sleep time’ using the ↑ or ↓ button.
8. Confirm with the → button.
9. Exit the menu with the 5 button.
Location
5
↑
↓
Menu
→
Mode
←
All rooms
Program
Location
5
↑
↓
Menu
→
Mode
←
All rooms
Sensor settings
Location
5
↑
↓
Menu
→
Mode
←
All rooms
Operating mode
Location
5
↑
↓
Menu
→
Mode
←
All rooms
Sleep _______
Location
5
↑
↓
Menu
→
Mode
←
All rooms
? Mo 14:38
Location
5
↑
↓
Menu
→
Mode
←
All rooms
? Mo 14:38
Location
5
↑
↓
Menu
→
Mode
←
All rooms
Sleep 1h 0m
Location
5
↑
↓
Menu
→
Mode
←
All rooms
Sleep timer
Location
5
↑
↓
Menu
→
Mode
←
All rooms
Sleep timer