Velleman VMB1TC - Manual (Page 72)

72 VMB1TC Temperatuurcontroller handleiding – rev 5.0
Operation
Pushing the push button repeatedly will switch the module between anti-freeze, night, day or comfort mode successively.
When the comfort, day or night mode LED is flashing, the sensor module is set temporarily (sleep timer) to the indicated
mode. During this time the program is ignored
When the sleep timer expires, the sensor module will resume the program or in case no program is present will return to
its previous setting.
Remarks:
• Anti-freeze mode can not be set temporarily.
• Standard time is set through the temperature controller.
• Overriding temporary mode can be done by pushing and holding the push button. The LED stops flashing and the
sensor remains in the selected mode until the next program step is executed.
• Local operation can be locked or unlocked via a temperature controller VMB1TC or via the Velbus link program.
• When the sensor module is set to manual mode via a temperature controller VMB1TC or via the Velbus link program,
local operation will be locked.