Veris Industries H81xx SERIES Install - Manual (Page 4)

Z205338-0F Page 4 of 10 ©2013 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected] 09132
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
Installation Guide
Power Monitoring
H81xx
TM
Product Diagram H81xx Series Cover
1. Display. Large digit backlit LCD for data and diagnostics.
2. Security hasp.
3. Current transformer input terminals. These ensure that voltage lead and current transformer are properly matched (e.g. red to
red).
4. Voltage input terminals. These ensure that voltage lead and current transformer are properly matched (e.g. red to red).
5. Pulse output terminals. These provide easy integration to existing control/data acquisition systems. (H8163 and H8167)
6. Phase loss output alarm. Alarm trips to protect equipment if phase voltage drops 25%. (H8163 and H8167)
7. Pulse rate selection switch. Set the pulse output at 0.1, 0.25, 0.50, or 1 pulse/kWh to match resolution requirements. (H8163
and H8167)
8. kWh reset. To reset the kWh counter, push both buttons at the same time and hold for 10 seconds. To reset kW max, push both
buttons and hold for 5 seconds.
9. Backlight enabling jumper. Remove this jumper to disable lighting.
10. Plain/full display data jumper. 20 or 90 second display cycle.
UL
® C US
2
1
H8163/H8167 Inside and Board Layout
N A + A D + B D + C D B C
N A B C
+ - + - + -
Comm Board Slot *
* Comm board is optional and sold as a separate product.
Display
Plain
Full
Black Black
Yellow Yellow Red Red
Power Supply Board Slot
3 4
5 6
7
8
9
10
H8150 Inside and Board Layout
N A + A D + B D + C D B C
N A B C
+ - + - + -
Display
Plain
Full
Black Black
Yellow Yellow Red Red
Power
Supply
Comm Board Slot *
* Comm board is optional and sold as a separate product.
3 4
8
9
10