Warrior 888 JK RENEGADE RACK AIR DAM (Universal) User Manual
Page 2
Protecting Your Adventure Lifestyle
========================================================================================
QUALITY • INTEGRITY • INNOVATION • SERVICE
Warrior Products, Inc.
16850 SW Upper Boones Ferry Rd
Ste. A
Durham, OR 97224
Phone (888) 220-6861
Fax (503) 692-0364
3. Utilizing a hand drill and a 3/8” drill bit, drill
out the (4) mounting holes through the dimple
plates. Clean up any metal burrs and apply
some primer or touch up paint to the bare metal
to prevent any future rust issues. Once the
paint has sufficiently dried, position the air dam
so that its angle matches the angle of the front
basket section then use the provided hardware
to attach the 888 Air Dam to the front basket
section. Order of hardware is – bolt, flat
washer (through dimple plate, through air dam
bracket), lock washer then nut. Do not fully
tighten until all hardware is in position. Once
you are satisfied, fully tighten hardware and
reattach the front basket section back onto the
Renegade Rack. Your installation is complete.
If you need further assistance installing your product, please contact us by email at
or call
us at (888) 220-6861.
THANK YOU FOR PURCHASING WARRIOR PRODUCTS