Warrior 30841 LIFT KIT (1997 – 2006 Jeep TJ Wrangler) User Manual
Page 4
Protecting Your Adventure Lifestyle
========================================================================================
QUALITY • INTEGRITY • INNOVATION • SERVICE
Warrior, Inc.
16850 SW Upper Boones Ferry Rd
Ste. A
Durham, OR 97224
Phone: (888) 220-6861
Fax: (503) 692-0364
[email protected]
www.warriorproducts.com
26. On the rear, assemble the sway bar end links using the factory hardware. See Figure 6
27. Tighten lower arm pivot bolts to 130 ft. lbs and the track bar mounting bolts to 74 ft. lbs.
28. A brake line bracket is supplied with this kit for the rear of the vehicle. Remove the brake line at the frame mount. Do
not remove the rubber line from the steel line. This will cause the brakes not to function properly unless the lines are
bled. Mount the bracket to the factory location with the supplied hardware and tighten. Place the factory line at the other
end of the bracket in the slotted hole.