Warrior 2960 Complete LED Tail Light Kit (2007 – 2013 Jeep JK Wrangler) - Manual (Page 3)

QUALITY • INTEGRITY • INNOVATION • SERVICE
11. Install the rubber lip seal around the tail light boxes, cut the ends to desired result. For the outer two
holes use the supplied plastic spacers on the back side (inside of the tub) of the 3” long bolt with the
angled surface against the body metal. These will allow the _-20 3” long bolt to sit straight so that they fit
flat against the light box.
12. Tighten all four bolts, connect the wires and install the LED lights.
Thanks for purchasing Warrior Products! Please see our other Jeep accessories at www.warriorproducts.com