VEGA 145 Safety barrier - Manual (Page 4)

Technical Information
4 Type 145
Dimensional drawing
Mounting instructions
13,5
41
86
72,5
16
25
77 (*73)
For mounting on TS 32 (C-profile) acc. to EN
50 035 and TS 35 x 7,5 (profile) acc. to EN 50 022 * Dimension only in conjunction with carrier rail
TS 35 x 7,5
Please observe when installing the ia safety barrier
type 145 that the parts of the measuring system
must be mounted acc. to the special conditioning
and regulations of the conformity certificates or test
certificates (the respective certificates are attached
to the consigment). Furthermore the following is important:
-
The safety barrier and the signal conditioning
instrument should be only used outside the Ex-
area.
- TS 32 or TS 35 x 7,5 carrier rail is required for
fastening (see sketch).
- An Ex-wiring in the switching cabinet is not
necessary when the safety barrier and the
respective signal conditioning instrument are
mounted adjacent to one another.