2 mounting, 3 electrical connection, 4 set-up – VEGA VEGASTAB 593, 593-60, 594 User Manual
Page 7: 5 diagnosis, 1 maintenance, 2 repair
VEGASTAB 593, 594, 593-60
7
Operating instruction
2 Mounting
The power supply units are designed as mod-
ule cards in European size and are suitable for
the installation in VEGA 19“-carriers BGT 596 or
BGT 596 Ex.
3 Electrical connection
VEGASTAB 593, 593-60 and 594
4 Set-up
- First check the position of the selection
switch for input voltage (only with VEGASTAB
593 and 594).
- Never operate the power supply units without
PE-connection (EMC).
- Ensure that the ventilation openings of the
power supply units and the carriers are not
covered.
An additional external ventilation is not re-
quired.
5 Diagnosis
5.1 Maintenance
The instrument is maintenance-free. The fuse of
the VEGASTAB 593-60 power supply unit is
accessible from outside, see dimensions. Note
the respective technical data for fuse replace-
ment.
5.2 Repair
Due to safety and guarantee reasons repair
work beside the wiring must only be made by
VEGA-staff.
In case of a defect please return the respective
instrument with a short description of the error
to our repair department.
d
V (+)
z
4
N
L
PE
V (+)
GND (–)
GND (–)
out
out
8
10
12
14
16
18
20
22
24
26
28
30
32
6
Output voltage
Connections 12 … 24
are not coordinated
Supply voltage (note data on the
type plate or the position of the
voltage change-over switch)
Multiple plug acc. to DIN 41 612,
series H, 15-pole