VEGA PACTware-DTM Collection 01_2014 User Manual
Page 16
16
5 Operation
PACTware/DTM Collection 01/2014 • Installation, first steps
28243-EN-131203
Fig. 8: DTM view VEGAPULS 62 offline operation (synchronized)
Online mode
In online mode, the instruments on which the parameter adjustment
is to be carried out must be connected and ready for operation. By
selecting the appropriate DTM with the right mouse key and the com-
mand "Connect", the online mode is set up for operation. After double
clicking to the DTM, connection is initiated which simultaneously
checks the communication, the sensor type and additional param-
eters. If necessary, all parameters of the instrument will be transferred
automatically. Via the PACTware menu item "Read data from device",
all parameters of the instruments can be loaded anytime. All modifica-
tions which are carried out will be stored automatically in the instru-
ments after pushing the OK or Accept button.