VEGA PACTware-DTM Collection 01_2014 - Manual (Page 17)

17
5 Operation
PACTware/DTM Collection 01/2014 • Installation, first steps
28243-EN-131203
Fig. 9: DTM view VEGAPULS 62 online operation (synchronized)
By selecting the respective DTM with the right mouse key and the
command "Separate connection", the DTM can be switched again to
offline operation.
Information:
Detailed explanations on parameter adjustment and project crea-
tion are available in the online help of PACTware and the DTMs. Also
consult the operating instructions manual of the corresponding instru-
ment for setup and correct parameter adjustment.
5.5 Parameter adjustment (non-synchronized
operation)
With the parameter adjustment in non-synchronized mode, the
instance data, this means the data stored in the DTM, and the device
data are kept separately. An automatic adjustment is not carried out.
For this reason, the contents of the DTM window in offline mode can
be different to that in online mode. Furthermore only data of the pa-
rameter page are loaded during connection which is actually opened
in the DTM.
This mode is a version which is particularly designed for slow bus
systems (e.g. Wireless HART). For activation of this mode, you have
to use the VEGA DTM Configurator, file card "Synchronization".