VEGA VEGATOR 631 Ex - Manual (Page 8)

The serial number allows you to access the delivery data of the
instrument via www.vega.com, "VEGA T
ools" and "serial number
search".
3 .2 Principle of operation
VEGATOR 631 Ex is a single signal conditioning instrument for
processing the signals of conductive probes.
The VEGATOR 631 Ex signal conditioning instrument powers
connected sensors and simultaneously processes their measuring
signals.
When the medium reaches the switching point of the sensor, the
voltage between sensor and VEGATOR 631 Ex drops. The output
relays then switch according to the set mode.
Detailed information about the power supply can be found in chapter
"T
echnical data".
3 .3 Operation
The integration time and the mode (A/B) can be preset via a DIL switch
block on the signal conditioning instrument.
A potentiometer for adjustment the switching point is located on the
front panel of VEGATOR 631 Ex.
3 .4 Packaging, transport and storage
Your instrument was protected by packaging during transport. Its
capacity to handle normal loads during transport is assured by a test
according to DIN EN 24180.
The packaging of standard instruments consists of environment-
friendly, recyclable cardboard. For special versions, PE foam or PE foil
is also used. Dispose of the packaging material via specialised
recycling companies.
Transport must be carried out under consideration of the notes on the
transport packaging. Nonobservance of these instructions can cause
damage to the device.
The delivery must be checked for completeness and possible transit
damage immediately at receipt. Ascertained transit damage or
concealed defects must be appropriately dealt with.
Up to the time of installation, the packages must be left closed and
stored according to the orientation and storage markings on the
outside.
Application area
Functional principle
Power supply
Packaging
Transport
Transport inspection
Storage
8 VEGATOR 631 Ex • Signal conditioning instrument
3 Product description
23440
-EN
-090130