VEGA VEGAVIB 67 - transistor output - Manual (Page 18)

1
4 4 4
2 3
Fig. 9: Material versions, single chamber housing
1 Plastic (not with EEx d)
2 Aluminium
3 Stainless steel (not with EEx d)
4 Filter element for pressure compensation or blind stopper with version IP 66/
IP 68, 1 bar (not with EEx d)
3
4
5
1
2
Fig. 10: Electronics and connection compartment
1 Potentiometer for switching point adaptation (covered)
2 DIL switch for mode adjustment
3 Ground terminal
4 Screwed terminals
5 Control lamp
We recommend connecting VEGAVIB 67 in such a way that
the switching circuit is open when there is a level signal, line
break or failure (safe condition).
The instrument is used to control relays, contactors, magnet
valves, warning lights, horns as well as PLC inputs.
Housing overview
Electronics and connection
compartment
Wiring plan
18 VEGAVIB 67 - with transistor output
Connecting to power supply
29297
-EN
-060508