VEGA VEGAPULS 62 (≥ 2.0.0 - ≤ 3.8) standpipe ver. Profibus PA User Manual
Page 33
Function
Reset value
Sensor address
no reset
Language
no reset
Factory setting
Like basic adjustment, furthermore special parameters are reset to
default values.
5)
Pointer
The min. and max. distance values are reset to the actual value.
Additional adjustment and diagnosis options such as e.g. scaling,
simulation or trend curve presentation are shown in the following menu
schematic. You will find a detailed description of these menu items in
the operating instructions manual "Indicating and adjustment module".
5)
Special parameters are parameters which are set customer-specifically on
the service level with the adjustment software PACTware.
Optional settings
VEGAPULS
62 standpipe version • Profibus PA
33
6 Set up with the indicating and adjustment module PLICSCOM
28739
-
EN
-090305