10 supplement, 1 technical data – VEGA VEGAPULS 62 (≥ 2.0.0 - ≤ 3.8) standpipe ver. Profibus PA User Manual
Page 44
10 Supplement
10.1 Technical data
General data
316L corresponds to 1.4404 or 1.4435
Materials, wetted parts
-
Process fitting
316L, Hastelloy C22, Hastelloy C22 plated
-
Seal process fitting - threaded version
Klingersil C-4400
-
Antenna cone
PTFE (TFM 1600 PTFE), PP
-
seal, antenna system
FKM (Viton), FFKM (Kalrez 2035, 6230 (FDA),
6375)
-
Standpipe
316L, Hastelloy C22
Materials, non-wetted parts
-
Housing
Plastic PBT (polyester), Alu die-casting powder-
coated, 316L
-
Seal between housing and housing
cover
NBR (stainless steel housing), silicone (Alu/plastic
housing)
-
Inspection window in housing cover for
PLICSCOM
Polycarbonate (UL-746-C listed)
-
Ground terminal
316Ti/316L
Weight
-
Process fitting - thread, depending on
thread size and housing material
2 … 2.8 kg (4.409 … 6.173 lbs)
-
Process fitting - flange, depending on
flange size and housing material
4.2 … 15.4 kg (9.259 … 33.95 lbs)
-
Standpipe
1.6 kg/m (1.1 lbs/ft)
Standpipe length
<
5.85 m (19.19 ft)
Output variable
Output signal
digital output signal, format according to IEEE-754
Sensor address
126 (default setting)
Current value
10 mA, ±0.5 mA
Damping (63 % of the input variable)
0 … 999 s, adjustable
Input variable
Measured value
Distance between process fitting (seal surface
hexagon or lower edge of flange) of the sensor and
product surface
Min. distance
0 mm
Measuring range
up to 5.85 m (19.19 ft)
6)
6)
According to the respective standpipe length.
44
VEGAPULS
62 standpipe version • Profibus PA
10 Supplement
28739
-EN
-090305