VEGA VEGAVIB 67 - contactless electronic switch - Manual (Page 10)

On the electronics module you will find the following indicating
and adjustment elements:
l
signal lamp for indication of the switching condition (green/
red)
l
potentiometer for adaptation to the product density
l
Mode switch for selecting the switching condition (min./
max.)
3.4 Storage and transport
Your instrument was protected by packaging during transport.
Its capacity to handle normals loads during transport is
assured by a test acc. to DIN 55439.
The packaging of standard instruments consists of environ-
ment-friendly, recyclable cardboard. In addition, the sensor is
provided with a protective cover of cardboard. For special
versions PE foam or PE foil is also used. Dispose of the
packaging material via specialised recycling companies.
l
Storage and transport temperature see "Supplement -
Technical data - Ambient conditions"
l
Relative humidity 20 … 85 %
Packaging
Storage and transport tem-
perature
10 VEGAVIB 67 - with contactless electronic switch
Product description
29296
-EN
-060508