VEGA VEGASWING 51 - transistor (PNP) - Manual (Page 11)

1
2
Fig. 3: Horizontal installation
1 Switching point
2 Switching point (recommended mounting position, particularly for adhesive
products)
Use the recommended cables (see chapter "Connecting to power
supply") and tighten the cable gland.
You can give your VEGASWING 51 additional protection against
moisture penetration by leading the connection cable downward in
front of the cable entry. Rain and condensation water can thus drain
off. This applies mainly to outdoor mounting as well as installation in
areas where high humidity is expected (e.g. through cleaning
processes) or on cooled or heated vessels.
Fig. 4: Measures against moisture penetration
Do not hold VEGASWING 51 on the tuning fork.
Moisture
Transport
VEGASWING 51 • - transistor (PNP) 11
4 Mounting
30213
-
EN
-120124