VEGA VEGAWAVE 62 - NAMUR - Manual (Page 19)

6 Set up
6 .1 General information
The figures in brackets refer to the following illustrations.
On the electronics module you will find the following indicating and
adjustment elements:
l Potentiometer for adaptation to the product density (1)
l DIL switch for mode adjustment - min./max. (2)
l Simulation key (3)
l Signal lamp (6)
6 .2 Adjustment elements
4
5
6
3
1
2
Simulation
NAMUR IEC 60947-5-6
VB60N
Fig. 13: Electronics and connection compartment - NAMUR output
1 Potentiometer for switching point adaptation
2 DIL switch for characteristics reversal
3 Simulation key
4 Ground terminal
5 Connection terminals
6 Control lamp
With the potentiometer you can adapt the switching point to the solid. It
is already preset and must only be modified in special cases.
Function/Configuration
Electronics and connec-
tion compartment
Switching point adapta-
tion (1)
VEGAWAVE 62 • - NAMUR 19
6 Set up
32254
-
EN
-120418