VEGA VEGAFLEX 67 (-40…+150°C) 4 … 20 mA_HART four-wire - Manual (Page 14)

more than 1 m (3.281 in) length, you must secure the probe by
fastening a suitable isolated brace or guy directly above the end of the
rod.
I f there is a danger of the probe touching the vessel wall during
operation due to product movements or agitators etc., the measuring
probe should be securely fixed.
I n the gravity weight there is a thread (M12), e.g. for a ring bolt
( optional) - (article no. 2.27424).
M ake sure that the probe cable is not completely taut. Avoid tensile
loads on the cable.
A void undefined cable-vessel connections, i.e. the connection must be
either grounded reliably or isolated reliably. Any deviation from this
requirement can lead to measurement errors.
Fixing
14 VEGAFLEX 67 • 4 … 20 mA/HART - four-wire
4 M ounting
31854
-EN
-120329