VEGA PLICSRADIO R61 Wireless receiving unit - Manual (Page 33)

33
10 Supplement
PLICSRADIO R61 • Wireless receiving unit (single channel)
32625-EN-130228
Ʋ Standard version 4 dBi
Ʋ Version increased range 1.3 dBi
Display and adjustment module
Voltage supply and data transmission
through PLICSRADIO via gold-plated sliding contacts
(I²C bus)
Indication LC display in dot matrix
Adjustment elements 4 keys
Protection rating
Ʋ unassembled IP 20
Ʋ mounted into the sensor without cover IP 40
Materials
Ʋ Housing ABS
Ʋ Inspection window Polyester foil
Electromechanical data
Cable entry/plug
Ʋ Housing socket – 1 x cable gland M20 x 1.5 (cable: ø 5 … 9 mm), 2 x
blind plug M20 x 1.5
or:
– 1 x closing cap ½ NPT, 2 x blind plug ½ NPT
Ʋ Electronics housing – 1 x cable entry M20 x 1.5 (cable: ø 5 … 9 mm), 1 x
antenna connection (R-SMA)
or:
– 1 x closing cap ½ NPT, 1 x antenna connection
(R-SMA)
Spring-loaded terminals for wire cross-section up to 2.5 mm² (AWG 14)
Ambient conditions
Ambient, storage and transport tempera-
ture
-40 … +80 °C (-40 … +176 °F)
Electrical protective measures
Protection rating
Ʋ Plastic housing IP 66/IP 67
Ʋ Aluminium housing IP 66/IP 67 3)
Overvoltage category III
Protection class depending of the power supply unit version
Ʋ 24 V version II
Ʋ 115/230 V version I
Electrical separating measures
Reliable separation according to VDE 0106 part 1 between power supply and input
Ʋ Reference voltage 253 V (50 V at 24 V power supply unit version)
3) A suitable cable is the prerequisite for maintaining the protection rating.