VEGA VEGAFLEX 66 (-20…+250°C) 4 … 20 mA_HART four-wire User Manual
Page 13
Advertising
keep in mind that measurement down to the tip of the probe is not
possible. The exact value of the min. distance (lower dead band) is
stated in chapter "Technical data".
Fig. 3: Vessel with conical bottom
M
ake sure that the probe is not subjected to strong lateral forces.
M
ount VEGAFLEX 66 at a position in the vessel where no
disturbances, e.g. from filling openings, agitators, etc., can occur.
Fig. 4: Lateral load
Inflowing medium
VEGAFLEX
66 • 4 … 20
mA/HART four-wire
13
4 M
ounting
34170
-
EN
-100427
Advertising