VEGA Plug connector M12x1 for level sensors - Manual (Page 7)

7
3 Supplement
Plug connector M12x1 • for level sensors
30382-EN-130322
3 Supplement
3.1 Technical data
Materials
Contact support
PA, self-extinguishing
Contact CuZn, nickel layer and 0.8 µm gold-plated
Housing
Ʋ Plastic version PA 66 (UL94-HB)
Ʋ Stainless steel version (only for two-
wire and NAMUR versions)
316L
O-ring FKM
Temperature range
Plug connector - separate
-40 … +85 °C (-40 … +185 °F)
Plug - mounted on the sensor the lowest temperature is applicable
Electrical data
Ampacity
4 A
Reference voltage
Ʋ Plug - 4-pole 50 V AC
Ʋ Plug - 5-pole 35 V AC
Insulation group C according to VDE 0110
Test voltage 2 kV eff./60 s
Isolation resistor > 10³ MOhm
Protection rating
Plug connector - separate (connected status)
Ʋ Plastic version IP 67
Ʋ Stainless steel version (only for two-
wire and NAMUR versions)
IP 68 (0.2 bar/3 psig)
Plug connector - mounted on the sensor (connected status)
Ʋ All versions The lowest protection category applies