VEGA VEGACONNECT 4 - Manual (Page 9)

4 Connection
4.1 Connection to the PC
Note:
First of all you should install the driver before connecting VEGA-
CONNECT
4 to the PC.
An USB interface (1.1 or 2.0) is compulsory for connection of
VEGACONNECT
4 to a PC. The connection is provided with the
supplied USB cable. Voltage supply of VEGACONNECT 4 is provided
via the USB interface.
If the supplied USB cable is replaced by another one, make sure that the
insulation thickness of the cable is over 0.65 mm.
To operate VEGACONNECT 4, a suitable driver is required which is
included on the CD "DTM Collection". As an alternative, the software is
also available free-of-charge from our homepage. You should always
use the latest version to ensure the support of all instrument functions.
The system requirements for operation correspond to those of the
"DTM C
ollection" or of PACTware.
When installing the driver package "VEGA-DTM for Communication",
the suitable instrument driver is installed automatically. When
connecting VEGACONNECT 4, the driver installation is finished
automatically and is ready for operation without a restart.
Connection
Driver
VEGACONNECT 4 with connection box • Interface converter USB - HART/I²C 9
4 Connection
32628
-
EN
-091118