VEGA VEGAWAVE 63 - two-wire - Manual (Page 22)

When used on a control system, the following values apply:
l Mode min.
-
Vibrating element uncovered - 16 mA ±1 mA
-
Vibrating element covered - 8 mA ±1 mA
l Mode max.
-
Vibrating element uncovered - 8 mA ±1 mA
-
Vibrating element covered - 16 mA ±1 mA
Control lamp for indication of the switching status
l green = 8 mA
l red = 16 mA
l red (flashing) = Failure (< 2.3 mA)
6 .3 Function chart
Level switch VEGAWAVE 63
The following chart provides an overview of the switching conditions
depending on the adjusted mode and level.
Mode on the
sensor Level Signal current -
Sensor Signal lamp -
sensor
Max.
Overflow protec-
tion 8 mA
Green
Max.
Overflow protec-
tion approx. 16 mA
Red
Min.
Dry run protection approx. 8 mA
Green
Min.
Dry run protection approx. 16 mA
Red
Fault message
(min./max. mode) any < 2.3 mA
flashes red
Signal lamp (5)
22 VEGAWAVE 63 • - two-wire
6 Set up
32260
-EN
-120418