VEGA VEGACAL 69 For connection to a signal conditioning instrument User Manual
Page 20
Advertising
20
6 Setup with a signal conditioning instrument
VEGACAL 69 • For connection to a signal conditioning instrument
31181-EN-130917
1. If the indication cannot be set to 100 %, proceed as follows:
2. If the indication does not reach 100 %, you have to set the range
selection switch on the probe one stage lower.
3. If the indication exceeds 100 % and cannot be reset, you have
to set the range selection switch of the probe to the next higher
stage. In both cases you have to repeat the adjustment.
Advertising