VEGA VEGABAR External housing - Manual (Page 2)

2
Contents
External housing • For pressure transmitter VEGABAR
31087-EN-130322
Contents
1 About this document
1.1 Function ........................................................................................................................... 3
1.2 Target group ..................................................................................................................... 3
1.3 Symbolism used ............................................................................................................... 3
2 For your safety
2.1 Authorised personnel ....................................................................................................... 4
2.2 Appropriate use ................................................................................................................ 4
2.3 Environmental instructions ............................................................................................... 4
3 Product description
3.1 Configuration .................................................................................................................... 5
3.2 Principle of operation........................................................................................................ 5
3.3 Storage and transport....................................................................................................... 5
4 Mounting
4.1 Mounting preparations ..................................................................................................... 7
4.2 Exchange of the electronics module ................................................................................. 7
4.3 Mounting steps, external housing ..................................................................................... 8
5 Connect the sensor to the external housing
5.1 Preparing the connection ............................................................................................... 10
5.2 Connection procedure .................................................................................................... 10
5.3 Wiring plan ..................................................................................................................... 11
6 Setup
6.1 Setup .............................................................................................................................. 14
7 Maintenance
7.1 Instrument repair ............................................................................................................ 15
8 Dismounting
8.1 Dismounting steps.......................................................................................................... 16
8.2 Disposal ......................................................................................................................... 16
9 Supplement
9.1 Technical data ................................................................................................................ 17
9.2 Dimensions .................................................................................................................... 18
Safety instructions for Ex areas
Please note the Ex-specific safety information for installation and op-
eration in Ex areas. These safety instructions are part of the operating
instructions manual and come with the Ex-approved instruments.
Editing status: 2013-03-11