VEGA Filter element - Manual (Page 7)

4 M ounting
4.1 P repare electronics
Proceed as follows:
1 Switch off power supply
2 Unscrew housing cover of the electronics compartment
3 Remove the indicating and adjustment module, in case one
is installed
4 Disconnect the connection cables of the supply voltage on
the eletronics module (terminals 1 and 2)
4.2 M ount filter element
Proceed as follows:
1 Plug the filter element onto the oscillator
Mounting steps
Mounting steps
Filter element 7
Mounting
35028
-
EN
-080619