VEGA Filter element - Manual (Page 9)

5 C onnecting to power supply
5.1 P reparing the connection
Follow the instructions in the operating instructions manual of
the sensor.
5.2 C onnection procedure
I²C
Display
1
2
1 2 5 6 7 8
Fig. 2: Wiring plan
1
Voltage supply/Signal output
2 Filter element
1 Connect the plus cable of the power supply to the terminal
of the red connection cable
2 Connect the minus cable of the power supply to the
terminal of the blue connection cable
3 Insert the plug connector into the excavation in front of the
oscillator
4 Press the indicating and adjustment module (1) onto the
electronics and turn it to the right until it snaps in.
Filter element 9
Connecting to power supply
35028
-
EN
-080619