VEGA Protective cover - Manual (Page 3)

1 For your safety
1
.
1 Authorised personnel
All operations described in this operating instructions manual must be
carried out only by trained specialist personnel authorised by the plant
operator.
During work on and with the device the required personal protective
equipment must always be worn.
1
.
2 Appropriate use
The protective cover is an accessory or retrofit part for sensors from
the VEGA plics
®
line of products.
1
.
3 General safety instructions
The safety information in the operating instructions manual of the
respective sensor must be noted.
1
.
4 Safety instructions for Ex areas
Please note the Ex-specific safety information for installation and
operation in Ex areas. These safety instructions are part of the
operating instructions manual and come with the Ex-approved
instruments.
Protective cover 3
1 For your safety
34296
-
EN
-120516