VEGA VEGAPULS 67 (≥ 2.0.0 - ≥ 4.0.0) Foundation Fieldbus - Manual (Page 65)

65
11 Supplement
VEGAPULS 67 • Foundation Fieldbus
36534-EN-121011
Ʋ Plastic housing IP 66/IP 67
Ʋ Aluminium housing, stainless steel
housing - investment casting, stain-
less steel housing - electro-polished
IP 66/IP 68 (0.2 bar) 5)
Ʋ Aluminium and stainless housing, in-
vestment casting (optionally available)
IP 66/IP 68 (1 bar)
Overvoltage category III
Protection class III
Approvals
Instruments with approvals can have different technical data depending on the version.
For that reason the associated approval documents of these instruments must be carefully noted.
They are part of the delivery or can be downloaded under www.vega.com and "VEGA Tools" as
well as under "Downloads" and "Approvals".
11.2 Supplementary information Foundation Fieldbus
The following table gives you an overview of the instrument versions and the corresponding device
descriptions, the electrical characteristics of the bus system as well as the applied function blocks.
Revisions Data DD-Revision Rev_01
CFF-File 010101.cff
Device Revision 0101.ffo
0101.sym
Cff-Revision xx xx 01
Device software revision > 4.4.0
ITK (Interoperability Test Kit) Number 5.0.2
Electricial Characteristics Physicial Layer Type Low-power signaling, bus-pow-
ered, FISCO I.S.
Input Impedance > 3000 Ohms between
7.8 KHz - 39 KHz
Unbalanced Capacitance < 250 pF to ground from either
input terminal
Output Amplitude 0.8 V P-P
Electrical Connection 2 Wire
Polarity Insensitive Yes
Max. Current Load 10 mA
Device minimum operating voltage 9 V
Transmitter Function Blocks Resource Block (RB) 1
Transducer Block (TB) 1
Standard Block (AI) 3
Execution Time 30 mS
5) The prerequisites for maintaining the protection rating are a suitable cable as well as correct mounting.