VEGA VEGAFLEX series 60 Recurring function test - Manual (Page 16)

Test 3.3 - Verification of the instrument parameters
□ Sensor documentation of the
setup available
or
□ Sensor documentation (at least 6
months old) is available
File name:
□ Parameters correspond
□ Parameters do not correspond -
however checked on correctness File name:
□ Parameters do not correspond -
deviation not acceptable File name:
□ Sensor documentation of the
setup not available □ Parameters checked on correct-
ness and saved (recheck after 6
months necessary) File name:
Test result □ All parameters correct or
checked on correctness □ Parameters not correct
Tester:
Test 3.4 - Verification of the echo data
Useful echo (completely on top) □ Corresponds □ Does not correspond
Corresponding amplitude □ In the tolerance range □ Not in the tolerance range
Test result □ Corresponds □ Does not correspond
Test 3.5 - Verification of the sensor reaction
Reduction of the level □ Distance value [m] increases □ Other reaction
Increase of the level □ Distance value [m] decreases □ Other reaction
Test result □ Corresponding sensor reaction □ Sensor reaction does not corre-
spond
● Summary 92 % (λ
du
)
Date Signature
Test 3.1 / 3.2 / 3.3 / 3.4 / 3.5 □ All five test points passed □ One or several test points did not
pass
● Summary 88 % (λ
du
)
Date Signature
16 Recurring function test • for VEGAFLEX series 60
5 Test protocol - Recurring function test
36552
-EN
-100225