SUUNTO LUMI - Manual (Page 12)

4 GENERAL SETTINGS
If you have not yet activated your Suunto Lumi wristop, please do so now! Just
press any button, and then enter your personal preferences: language,
measurement units, time and date. To change any settings, you need to enter
MENU .
To enter MENU , press [Mode] for 2 seconds - the MENU icon in the upper right
corner will blink twice. Use [Up] or [Down Light] to scroll through the menu
items until you reach
GENERAL . Press [Mode] to enter GENERAL . Any changes
you make in MENU will take effect immediately. Press [View] to return to the
previous menu item.
4.1 Button tones
Button tones can be turned either on or off. If you choose to turn button tones
on, you will hear a beep whenever you press a button.
In
GENERAL , press [Mode] to enter BUTTON TONES . Press [Up] or [Down Light] to
turn the button tones on or off.
4.2 Tone guides
Tone guides can be turned either on or off. If you choose to turn tone guides
on, you will hear a beep after you have made a setting or whenever your Suunto
Lumi wants your attention.
You will hear tone guides when you:
● change a setting value
● should set the altitude reference value
● start or stop the log recorder
9
en