SUUNTO LUMI User Manual
Page 30
NOTE: You need to stop the log recorder in order to reset it!
NOTE: Your Suunto Lumi has the capacity to store up to 5 logs. When you start
recording your 6th log, the first log erases from the memory while the second log
moves up into that first spot. Each log can be recorded for a maximum of 33 hours.
The altitude information is recorded every 30 seconds.
While you are recording logs, your Suunto Lumi shows you additional views
about your altitude change: altitude difference, ascent and descent.
●
Altitude difference: indicates your altitude difference from when you
started your log
●
Ascent: indicates how much you have ascended from the log start
●
Descent: indicates how much you have descended from the log start
In the additional views:
is displayed when your altitude is above the starting point.
is displayed when your altitude is the same as at the starting point.
is displayed when your altitude is below the starting point.
is displayed when you view how much you have ascended from the log
start.
is displayed when you view how much you have descended from the log
start.
NOTE: These views are only displayed, when the log recorder is turned on. The
view disappears after you reset the log recorder.
27
en