VEGA VEGAPULS 67 (≥ 2.0.0 - ≥ 4.0.0) Modbus and Levelmaster protocol - Manual (Page 4)

4
Contents
VEGAPULS 67 • Modbus and Levelmaster protocol
41369-EN-121011
Contents
1 About this document
1.1 Function ............................................................................. 6
1.2 Target group ....................................................................... 6
1.3 Symbolism used ................................................................. 6
2 For your safety
2.1 Authorised personnel ......................................................... 7
2.2 Appropriate use .................................................................. 7
2.3 Warning about incorrect use ............................................... 7
2.4 General safety instructions ................................................. 7
2.5 CE conformity ..................................................................... 8
2.6 NAMUR recommendations ................................................ 8
2.7 Radio license for Europe .................................................... 8
2.8 Radio license for USA/Canada ........................................... 8
2.9 Environmental instructions ................................................. 8
3 Product description
3.1 Configuration .................................................................... 10
3.2 Principle of operation ........................................................ 11
3.3 Packaging, transport and storage ..................................... 11
3.4 Accessories and replacement parts ................................. 12
4 Mounting
4.1 General instructions ......................................................... 14
4.2 Collar or adapter flange .................................................... 14
4.3 Mounting strap ................................................................. 15
4.4 Instructions for installation ................................................ 16
5 Connecting to power supply and bus system
5.1 Preparing the connection ................................................. 25
5.2 Connecting ....................................................................... 25
5.3 Wiring plan, double chamber housing .............................. 27
5.4 Switch-on phase ............................................................... 28
6 Set up the sensor with the indicating and adjustment mod-
ule
6.1 Adjustment volume ........................................................... 29
6.2 Insert indicating and adjustment module .......................... 29
6.3 Adjustment system ........................................................... 30
6.4 Parameter adjustment ...................................................... 31
6.5 Saving the parameter adjustment data ............................. 43
7 Setting up sensor and Modbus interface with PACTware
7.1 Connect the PC ................................................................ 45
7.2 Parameter adjustment with PACTware .............................. 46
7.3 Saving the parameter adjustment data ............................. 47
8 Set up with other systems
8.1 DD adjustment programs ................................................. 48
8.2 Communicator 375, 475 ................................................... 48
9 Diagnosis, Asset Management and service
9.1 Maintenance .................................................................... 49