VEGA VEGAFLEX 86 4 … 20 mA_HART two-wire Coax probe With SIL qualification - Manual (Page 53)

53
7 Set up with the display and adjustment module
VEGAFLEX 86 • 4 … 20 mA/HART two-wire
44231-EN-130823
Setup
Menu item Default value Modified value
Lock adjustment Locked
Measurement loop name Sensor
Units Distance unit: mm
Temperature unit: °C
Probe length Length of the probe Ex factory
Medium type Liquid
Application Level, vessel
Medium, dielectric constant Water-based, > 10
Superimposed gas phase Yes
Dielectric constant, upper medium (TS) 1.5
Tube inner diameter 200 mm
Max. adjustment - Level 100 %
Max. adjustment - Level Distance: 0.000 m(d) - note block-
ing distances
Min. adjustment - Level 0 %
Min. adjustment - Level Distance: Probe length - take dead
band into account
Accept adjustment of the level measurement? Yes
Max. adjustment - Interface
100 %
Max. adjustment - Interface Distance: 0.000 m(d) - note block-
ing distances
Min. adjustment - Interface 0 %
Min. adjustment - Interface Distance: Probe length - take dead
band into account
Integration time - Level 0.0 s
Integration time - Interface 0.0 s
Linearization type Linear
Linearization - Socket correction 0 mm
Linearization - Vessel height Probe length
Scaling size - Level Volume in l
Scaling unit - Level Litres
Scaling format - Level Without decimal positions
Scaling level - 100 % correspond to 100
Scaling level - 0 % correspond to 0
Accept scaling of the level measurement Yes
Scaling variable - Interface Volume
Scaling unit - Interface Litres
Scaling format - Interface Without decimal positions