VEGA VEGABAR 52 with small flange 4 x M5 and extension tube ø 42 mm - Manual (Page 6)

6
4 Supplement
VEGABAR 52 • with small flange 4 x M5 and extension tube ø 42 mm
45008-EN-130417
4 Supplement
4.1 Technical data
General data
Material, process fitting
316L
Material, process seal FKM (VP2/A, A+P70.16), EPDM (A+P 75.5/KW75F),
FFKM (Kalrez 6375, Perlast G75S, Perlast G75B)
Required torque for the mounting screws 5 Nm (3.688 lbft)5 Nm (3.688 lbft)
Process conditions
Process pressure max.
40 bar (580.2 psi)
4.2 Dimensions VEGABAR 52 with small flange 4 x M5 and extension
ø 42 mm
VEGABAR 52
44,5 mm (1.75 ")
17,5 mm (
0.69
")
ø 42 mm
(1.65")
ø 64 mm
(2.52")
Fig. 2: Dimensions VEGABAR 52 with small flange 4 x M5 and extension ø 42 mm