VEGA VEGAPULS 66 Swivelling quick release fasterner (Clamp 3" ) - Manual (Page 16)

7 Maintenance and fault rectification
7.1 M aintenance
If the instrument is used properly, no special maintenance is required
in normal operation.
7.2 R ectify faults
The operator of the system is responsible for taking suitable measures
to rectify faults.
Should these measures not be successful, please call in urgent cases
the VEGA service hotline under the phone no. +49 1805 858550.
The hotline is available to you 7 days a week round-the-clock. Since
we offer this service world-wide, the support is only available in the
English language. The service is free of charge, only the standard
telephone costs will be charged.
Depending on the reason for the fault and the measures taken, the
steps described in chapter "Set up" may have to be carried out again.
7.3 E xchange seals
To exchange the seals, proceed as follows:
1 Swivel the radar sensor as described above
2 Remove the seal on the head section and replace it by a new one
1
2
3
Fig. 9: Position the seals
1 Clamp seal
2 Cone seal outside
3 Cone seal inside
Reaction when malfunc-
tions occur
24 hour service hotline
Reaction after fault rec-
tification
16 Swivelling quick release fasterner • for VEGAPULS 66 Clamp 3"
7 Maintenance and fault rectification
41775
-EN
-121018