VEGA VEGAFLEX 83 Foundation Fieldbus PFA insulated - Manual (Page 39)

39
6 Set up with the display and adjustment module
VEGAFLEX 83 • Foundation Fieldbus
44227-EN-130910
For the socket correction you have to enter the height of the socket
above the upper edge of the vessel. If the socket is lower than the up-
per edge of the vessel, this value can also be negative.
+
h
D
- h
Fig. 27: Vessel height und socket correction value
D Vessel height
+h Positive socket correction value
-h Negative socket correction value
In the menu item "Lock/unlock adjustment", you can protect the
sensor parameters against unauthorized modification. The PIN is
activated/deactivated permanently.
The following adjustment functions are possible without entering the
PIN:
•
Select menu items and show data
•
Read data from the sensor into the display and adjustment mod-
ule.
Lock/release setup - Ad-
justment