6 set up with the display and adjustment module, 1 insert display and adjustment module – VEGA VEGAFLEX 81 Profibus PA Coax probe User Manual
Page 27
27
6 Set up with the display and adjustment module
VEGAFLEX 81 • Profibus PA
44214-EN-130910
6 Set up with the display and adjustment
module
6.1 Insert display and adjustment module
The display and adjustment module can be inserted into the sensor
and removed any time. Four positions displaced by 90° can be se-
lected. It is not necessary to interrupt the power supply.
Proceed as follows:
1. Unscrew the housing cover
2. Place the display and adjustment module in the requested posi-
tion onto the electronics and turn to the right until it snaps in
3. Screw housing cover with inspection window tightly back on
Removal is carried out in reverse order.
The display and adjustment module is powered by the sensor, an ad-
ditional connection is not necessary.
Fig. 22: Insertion of the display and adjustment module with single chamber
housing into the electronics compartment