VEGA DIS-ADAPT - Manual (Page 3)

3
1 For your safety
DIS-ADAPT • Adapter for connection of an external display and adjustment unit
45250-EN-130625
1 For your safety
1.1 Appropriate use
DIS-ADAPT is a retrofit component for existing plics ® sensors for con-
nection of an external display and adjustment unit.
1.2 General safety instructions
The safety information in the operating instructions manual of the
respective sensor must be noted.
1.3 Safety instructions for Ex areas
Please note the Ex-specific safety information for installation and op-
eration in Ex areas. These safety instructions are part of the operating
instructions manual and come with the Ex-approved instruments.