VEGA DIS-ADAPT - Manual (Page 4)

4
2 Product description
DIS-ADAPT • Adapter for connection of an external display and adjustment unit
45250-EN-130625
2 Product description
The scope of delivery encompasses:
•
Adapter with connection cable and M12 x 1 plug
•
Documentation
– this operating instructions manual
The adapter DIS-ADAPT is an accessory part for the following plics ®
sensors with double chamber housing.
•
VEGAPULS series 60, hardware from 2.0.0, software from 4.0.0
•
VEGAFLEX 80 series
•
VEGABAR series 80
It consists of a contact plate, connection cable with mini plug connec-
tor and an M12 x 1 plug.
1
2
3
4
Fig. 1: Configuration of DIS-ADAPT
1 Contact plate
2 Mini plug connector
3 Connection cable
4 M12 x 1 plug
The contact plate is inserted into the electronics compartment of the
double chamber housing, the M12 x 1 plug into the housing wall.
This makes it possible to connect a VEGADIS 81 external display and
adjustment unit to the sensor without using the terminals.
The use of a PLICSCOM display and adjustment module in parallel
in the connection compartment is permitted. However, simultaneous
adjustment is not possible.
The housing cover without inspection window still fits on the electron-
ics compartment when DIS-ADAPT is mounted in place.
Scope of delivery
Application area