Vishay semiconductors – C&H Technology VS-100MT1.0P.PbF Series User Manual
Page 6
VS-40MT1.0P.PbF, VS-70MT1.0P.PbF, VS-100MT1.0P.PbF Series
www.vishay.com
Vishay Semiconductors
Revision: 30-Oct-13
5
Document Number: 94538
For technical questions within your region:
,
,
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
Fig. 11 - Current Rating Characteristics
Fig. 12 - On-State Voltage Drop Characteristics
Fig. 13 - Maximum Non-Repetitive Surge Current
Fig. 14 - Maximum Non-Repetitive Surge Current
Fig. 15 - Current Rating Nomogram (1 Module Per Heatsink)
Total Output Current (A)
Maximum Allowable Case Temperature (°C)
40
60
80
100
120
140
40 50 60 70 80 90 100 110 120 130
120˚
(Rect)
Per Module
100MT...P
R (DC) = 0.19 K/W
thJC
Instantaneous On-state Current (A)
Instantaneous On-state Voltage (V)
1
10
100
1000
0.5
1
1.5
2
2.5
3
3.5
4
Tj = 150˚C
Tj = 25˚C
100MT...P
Number Of Equal Amplitude Half Cycle Current Pulses (N)
Peak Half Sine Wave On-state Current (A)
100
150
200
250
300
350
400
1
10
100
At Any Rated Load Condition And With
Rated Vrrm Applied Following Surge.
Initial Tj = 125˚C
@ 60 Hz 0.0083 s
@ 50 Hz 0.0100 s
100MT...P
Per Junction
Pulse Train Duration(s)
Peak Half Sine Wave On-state Current (A)
0
50
100
150
200
250
300
350
400
450
500
0.01
0.1
1
10
Maximum Non Repetitive Surge Current
Versus Pulse Train Duration. Control
Initial T j = 125˚C
No Voltage Reapplied
Rated V rrm Reapplied
Of Conduction May Not Be Maintained.
100MT...P
Per Junction
Maximum Allowable Ambient Temperature (°C)
Total Output Current (A)
Maximum Total Power Loss (W)
0
30
60
90
120
150
0.05 K/W
RthSA = 0.025 K/W
- Delta R
0.5 K/W
1 K/W
0.3 K/
W
0.2 K/W
0.1 K/W
0
100
200
300
400
500
0
20
40
60
80
100
120˚
(Rect)
Tj = 150˚C
100MT...P