Atdec Telehook TH-1026-VF Installation manual - Manual

OR OR
Plastic Anchor (x2)
Self-Tapping
Screw (x2)
Hardware
Dry Wall Anchor (x4)
M4x10mm (x4)
M4x16mm (x4)
Wall Plate
Self-Tapping Screw
Plastic Anchor 8mm ( 5
16
") Hole
Wall
Plate
Dry Wall Anchor Screw
Dry Wall Anchor 10mm ( 3
8
") Hole
Wall Plate
Self-Tapping Screw
4mm ( 3
16
") Hole Timber Stud
M5x10mm
Security Screw (x2)
TH-1026-VF
Components Checklist
Flat Screen Wall Mount | Fixed
Wall Plate Display Plate
IMPORTANT INFORMATION
! IMPORTANT - Install Telehok 1026 Wall Mount as per Installation Instructions.
! This product supports a maximum load of 30kg (66lbs).
! This product only supports VESA compliant displays with 75mmx75mm (3"x3") and 100mmx100mm (4"x4")
mounting hole patterns.
! The manufacturer does not accept responsibility for incorrect installation.
Step 1. Check Components
Check you have received all parts against the component checklist and Hardware above.
Step 2. Mounting the Wall Plate
Tip: Use a spirit level to ensure wall plate is horizontal
Masonry Wall Dry Wall Timber Stud
Installation Instructions
Display Mounting
Screws
Tools Required:
Power Drill ‡
4mm ( 3
16
") drill bit ‡
Phillips Head screwdriver ‡
8mm ( 5
16
") masonry drill bit ‡
10mm (
3
8
") drill bit ‡
Spirit Level ‡